α-Glucosyl rutin is a water-soluble flavonoid derivative produced through enzymatic transglycosylation of rutin. Compared to standard rutin, its solubility increases by over 12,000 times, which makes it far more practical in aqueous skincare formulations. For formulation managers evaluating active ingredients for sensitive skin lines, this compound offers documented antioxidant, anti-inflammatory, and microcirculation-supporting activity. Its INCI name, Glucosyl Rutin, is officially listed, and its compatibility across pH 4–7 makes it straightforward to integrate into serums, day creams, and soothing emulsions without color or stability concerns.

α-glucosyl rutin is a flavonoid. The flavonoid belongs to the family of glycosylated. A glucose unit is linked to a rutin molecule by an alpha bond to form it, changing its physical properties in a fundamental manner. This is a light yellow solid powder which dissolves in water at 25°C more than 100 grams in 100 milliliters. This makes it a lot simpler to deal with than conventional rutin when used in water.
Reactive oxygen species (ROS) are generated by UV radiation and environmental stresses. The complex carried them away. It also prevents the production of histamine in skin tissue that is already sensitive and prevents pro-inflammatory molecules like COX-2 from acting. It’s particularly helpful for anti-redness and sensitive skin products, since both kinds of skin are more likely to have environmental damage and inflammation from the immune system, due to its two actions.
α-glucosyl rutin doesn't change much at pH 3.0 to 7.0 and stays steady through normal cooking stages in cosmetics (up to 80°C). It doesn't turn clear serums cloudy like raw rutin does, and it doesn't turn white cream bases yellow. To keep the long-term solution transparent, the amounts of residual quercetin and free rutin must stay below 0.5%. This is a quality standard that tells the difference between high-quality material and cheap supply.
One of glucosyl rutin’s most beneficial aspects in medicine is that it may strengthen capillary walls, as well as reduce transient redness in the face. It affects how open blood arteries are by allowing collagen to cross-link around microvessels. This immediately repairs the broken-capillary appearance that is frequent in persons with rosacea or always sensitive skin.
Free radicals accumulate and create fine wrinkles, uneven tone and loss of firmness, all indications of aging. α-glucosyl rutin is quite efficient at neutralizing these radicals and technical data shows that it absorbs UV-A and blue light (HEV) giving it additional photoprotective characteristics. It’s a good ingredient to add to morning serums and day moisturizers.
This chemical helps maintain the stratum corneum healthy by decreasing the action of inflammatory cytokines on the skin's surface. A skin barrier that is stronger holds water in better. This supplementary hydration benefit is beneficial to add to antioxidant claims when designing treatments for sensitive skin for irritation induced by dryness.
The purity of HPLC must be the major quality criterion for procurement teams. The substance that is allowed for active cosmetic application is restricted to ≥ 50% by HPLC. Residual rutin or quercetin should be less than 0.5%, ICP-MS should be less than 3 ppm lead or 2 ppm arsenic, microorganisms per USP <61> should be fewer than 1,000 CFU/g, and Karl Fischer moisture analysis should be performed to ensure powder stability. All of these criteria combined suggest that the item will perform the same way in all batches and won't make the recipe less stable. Suppliers who provide comprehensive COA documentation, third-party lab validation and UV-Vis spectrophotometry studies to verify the amount of glucosylation are the ones that should be taken seriously.
Current INCI lists suggest that companies adhering to the EU Cosmetics Regulation EC 1223/2009 need to name the ingredient on the label as Glucosyl Rutin. The procurement team should make sure that the technical information their vendor supplies them supports the Product Safety Report (CPSR) procedure. Such information might be toxicological data and stable testing records. If the formulation is going to be used on an organic or natural certified line, it should be noted down before trial orders are issued that the raw ingredients are ECOCERT/COSMOS compatible.
A steady supply is just as important as good raw materials. A sensitive skin brand's normal B2B buying process starts with INCI verification and a 5 kg trial sample. It then moves on to formulation testing and ends with an annual contract for 100 kg to 1 t. Suppliers need to show that they can handle foreign export paperwork, such as the compliance files needed for EU, US, and APAC markets, and make sure that batches are always available.
Standard rutin doesn't dissolve well in water (about 0.125 mg/mL at 25°C), which means it can't be used in most current cosmetics. This is completely fixed by α-glucosyl rutin. When added to serums, essences, and liquid emulsions, the glucosylated form works perfectly without causing any precipitation or coloring. In these forms, rutin just can't compare.
Hesperidin has some capillary-strengthening properties, but it's not as strong of an antioxidant as chemicals produced from rutin. Quercetin is a strong antioxidant, but it doesn't dissolve well in water and can be hard to mix with other ingredients. The antioxidant activity of α-glucosyl rutin is similar, but it is much more soluble and stable, which makes it the better choice for formulators who want to make high-quality skin health products.
The α-glucosyl rutin powder is a light yellow solid form that dissolves easily at room temperature and doesn't need any special tools to be worked on. It stays stable at temperatures that are normal for making cosmetics and works well with most preservative systems. This makes the recipe simpler and lowers the chance that compatibility issues will happen in pilot runs.
The chemical works well in serums that reduce redness, day and nite creams for sensitive skin, and soothing essences. Depending on the claim and distribution method, the usual amount used in cosmetics is between 0.1% and 1.0% w/w. It works well with vitamin C and bioflavonoids like hesperidin to support venous microcirculation in food supplement forms like pills or liquid beauty-from-within products.
You can keep the activity going by adding α-glucosyl rutin to the water phase at room temperature or while it is cooling (below 40°C). Most common humectants, film formers, and preservative systems can be used with it. Because it doesn't change much in pH between 3.0 and 7.0, formulators can use it in both acidic serums and almost neutral emulsion bases.
For ODM makers making sensitive repair templates, α-glucosyl rutin fits right into current formulation designs and doesn't need a lot of changes to the base. It is mentioned as Glucosyl Rutin in China's NMPA IECIC 2021 inventory, which helps with the registration of local products. Full paperwork packages, which include COA, TDS, SDS, and INCI confirmation, make it easier to submit goods for regulatory approval in all target markets.
α-glucosyl rutin has a lot of benefits for formulations for sensitive skin, including antioxidant activity, capillary reinforcement, an anti-inflammatory effect, and a good ability to dissolve in water. It is stable across a range of pH levels, works with common cosmetic systems, and is listed on the official INCI list. These factors make it a good choice for formulation managers who are making anti-redness or sensitive skin product lines. If it comes from a source that is at least 50% pure by HPLC and has full documentation for its traceability, it works as a real active ingredient, not just a marketing claim. The next step that makes sense is to compare it to your current actives lineup.
About 12,000 times more water can dissolve in α-glucosyl rutin than in regular rutin. This means that it can be added to clear serums and liquid supplements at functional concentrations without causing it to precipitate.
No, unlike rutin, which turns yellow, α-glucosyl rutin is meant to stay almost white in the end product, as long as the amounts of free rutin and quercetin are kept below 0.5%.
Yes. It is stable down to pH 3.0, which was proven by testing its increased shelf life and resistance to heat stress. Because of this, it can be used for both acidic serums and useful drinks.
The International Nomenclature of Cosmetic Ingredients lists Glucosyl Rutin as the correct INCI name. Alpha-Glucosyl Rutin may be used in some scientific papers; this is the same ingredient, but Glucosyl Rutin should be used on INCI-compliant labels.
Technical tests show that α-glucosyl rutin absorbs HEV light and gets rid of the ROS that are made by blue light, which gives daytime formulations an extra layer of protection from the sun.
UNIWELL (Sichuan Uniwell Biotechnology Co., Ltd.) sells α-glucosyl rutin that is defined to be at least 50% pure by HPLC. Each batch comes with full COA, TDS, SDS, and INCI paperwork. We have been extracting plants for more than 10 years, are FDA and ISO certified, and keep more than 100 metric tons of raw materials in stock. Standard orders are shipped within three business days. To get a free taste right now, email us at info@uniwellbio.com.
1. Harborne, J. B., & Williams, C. A. (2000). Advances in flavonoid research since 1992. Phytochemistry, 55(6), 481–504.
2. Matsumoto, H., Inaba, H., Kishi, M., Tominaga, S., Hirayama, M., & Tsuda, T. (2001). Orally administered delphinidin 3-rutinoside and cyanidin 3-rutinoside are directly absorbed in rats and humans and appear in the blood as the intact forms. Journal of Agricultural and Food Chemistry, 49(3), 1546–1551.
3. Manthey, J. A., & Grohmann, K. (2001). Phenols in citrus peel byproducts: concentrations of hydroxycinnamates and polymethoxylated flavones in citrus peel molasses. Journal of Agricultural and Food Chemistry, 49(7), 3268–3273.
4. Nijveldt, R. J., van Nood, E., van Hoorn, D. E. C., Boelens, P. G., van Norren, K., & van Leeuwen, P. A. M. (2001). Flavonoids: a review of probable mechanisms of action and potential applications. The American Journal of Clinical Nutrition, 74(4), 418–425.
5. Oyama, Y., Sakai, H., Arata, T., Okano, Y., Nao, M., Ogawa, K., & Ishida, S. (2003). Protective effect of quercetin and rutin on UVB-induced oxidative damage in human skin cells. Free Radical Research, 37(7), 789–797.
6. Masaki, H. (2010). Role of antioxidants in the skin: anti-aging effects. Journal of Dermatological Science, 58(2), 85–90.
Have a project in mind? Share your requirements — we’ll turn your ideas into reliable products.